SP26
Automatic pneumatic cutting and forming machine for taped Hall transistors




SP26.02
CUT AND FORM
CUT AND FORM
SP26.05
CUT AND BEND 90°
SP26.06
CUT AND FORM WITH “S” SHAPE FOR FLAT LEAD
SP26.09
CUT AND BEND INTO “S” SHAPE
SP26 is an automatic, pneumatic machine with tape feed, centring, cutting and forming for taped Hall transistors. This machine was designed to operate Hall Transistors which are very delicate and require high precision in the positioning on the matrix of the die.
Model SP26 is equipped with a pneumatic centring gripper that locks the body of the component.
After cutting the component from the tape, the gripper moves it to the subsequent step (i.e., 90° bending, SMD form or other forms) and finally places it into a bin or into a set point where a mechanical hand (robot) can pick it up.
Model SP26 is equipped with a pneumatic centring gripper that locks the body of the component.
After cutting the component from the tape, the gripper moves it to the subsequent step (i.e., 90° bending, SMD form or other forms) and finally places it into a bin or into a set point where a mechanical hand (robot) can pick it up.
PRODUCTION/HOUR: 1.200
