TP/LN-500
Pneumatic cutting machine for loose radial components

TP/LN – 500/1 – 34.0001
TP/LN – 500/2 – 34.0002

Pneumatic machines TP/LN-500/1 and TP/LN-500/2 cut the leads of any kind of radial components, regardless of the diameter, material, pitch and form. This is possible through the use of a cobalt “guillotine” blade. The upper plate which determines the cutting height (standard 3,2 mm) must be ordered separately from the machine
because in most cases it must be designed in special way to adapt to the requested height, form and pitch of the components. Additional plates to increase height can be supplied upon request.

TP/LN-500/1 34.0001
Cutting area 53×43 mm.
Standard Stationary Plate 340111 must be separately ordered (340111).
Codes for special plates will be provided in the order receipt.

TP/LN-500/2 34.0002
Cutting area 53×93 mm.
Standard Stationary Plate 340211 must be separately ordered (340211).
Codes for special plates will be provided in the order receipt.