TP/SC4
Cutting forming machines for loose radial components

The TP/SC4 pneumatic machine very versatile piece of equipment , designed for cutting and forming loose radial components. A large number of dies are designed and manufactured to offer the most commonly requested standard forms and as well as special ones. Die 163000 requires the activation of a third cylinder, which is only applicable to model TP/SC4. It is possible to equip this machine, on request, with two wire holders in order to lock the leads between the body and the operation area. This option should be requested in the order.
16.0000
STANDARD 2 CYLINDERS WITHOUT FORMING DIE
Macchine per Radiali
16.0100
3 CYLINDERS WITHOUT FORMING DIE
Ø LEAD: FROM 0,3 TO 0,8 MM
PRODUCTION/HOUR: 2.000
Macchine per Radiali
163000 CENTER LEAD SPREAD – DOUBLE KINK ON OUTER LEADS
Macchine per Radiali
*: QUANTITY TO BE COMMUNICATED AT TIME OF ORDER

Standard dies for TP/SC4

160600
STAND OFF LOCK IN – DOUBLE KINK
P: 2,54 – 5,08 – 7,62 – 10,16 MM (.1 -.2 – .3 – .4”)
160700
STAND OFF-LOCK IN LED/DOUBLE KINK –
P:2,54 MM (.1”)
160800
STAND OFF-KINK OUTWARD
P: 2,54 – 5,08 – 7,62 – 10,16 MM. (.1 -.2 – .3 – .4”)
160900
BODY LOCKED ON P.C. BOARD
P:2,54 – 5,08 – 7,62 – 10,16 MM (.1 -.2 – .3 – .4”)
161000
STRAIGHT CUT
P: 2,54 – 5,08 – 7,62 – 10,16 MM (.1 -.2 – .3 – .4”)
161100
DIODE BRIDGE 4 LEADS
P: 5,08 MM (.2”)
161200
POLARITY 2,54 MM (.1”)
161300
90° BEND
161400
SURFACE MOUNTING
161500
STAND OFF/KINK INWARD
P: 2,54 – 5,08 – 7,62 – 10,16 MM (.1 -.2 – .3 – .4”)
161700
TO SPREAD OUT AND CUT
161800
REDUCE PITCH AND CUT
162100
TO 220 CENTRAL LEAD SPREAD AND CUT
162200
TO 220 CENTER LEAD SPREAD AND LOCK
162300
TO 220 CENTER LEAD SPREAD/3 LEAD LOCK
162400
TO 220 DOUBLE KINK ON THREE LEAD – IN LINE
162500
TO 92 CENTER LEAD SPREAD
162600
TO 92 CENTER LEAD SPREAD AND LOCK
162700
TO-92 CENTER LEAD SPREAD/THREE LEAD LOCK
162800
TO-92 STAND OFF-LOCK IN/THREE LEAD IN LINE
163100
TO 220 90° BENDING CENTER LEAD OFF SET