TP6/V/1-EC
Cutting bending machine for axial components vertical mounting

81.OL01
STANDARD

The TP6/V/1-EC model is designed for cutting and bending taped axial components for vertical mounting. It operates lead components with a diameter from 0,5 to 0,8 mm. The bending pitch is determined by the bending cam supplied, and can be changed by replacing the cam with one of a different thickness.
The TP6/V/1-EC machine comes only in the manual version for taped components.

WARNING: THE LENGTH OF THE LEAD BETWEEN THE BODY AND THE TAPE FOR A PITCH OF 2,54 MM NEEDS TO BE AT LEAST THE LENGTH OF THE BODY PLUS 12 MM

PITCHES THAT ARE LONGER THAN THE LEAD REQUESTED NEED TO BE INCREASED IN RELATION.

PRODUCTION/HOUR:
50.000

Standard versions for TP6/V/1-EC

81.OL01
PITCH 2,54 MM

81.OL03
PITCH 3,8 MM

81.OL04
PITCH 5,08 MM

81.OL05
PITCH 7,62 MM

TP6/V/21-EC
Cutting bending machine for axial components vertical mounting

81.OL21
RIENFORCED

The TP6/V/21-EC model is designed for cutting and bending taped axial components for vertical mounting. It operates components with lead Ø from 0,8 to 1,3 mm. The bending pitch is determined by the bending cam supplied, and can be changed by replacing the cam with one of a different thickness. TP6/V/1-EC-21 machine comes only in the manual version for taped components.

WARNING: THE LENGTH OF THE LEAD BETWEEN THE BODY AND THE TAPE FOR A PITCH OF 3,8 MM NEEDS TO BE AT LEAST THE LENGTH OF THE BODY PLUS 16 MM

PITCHES THAT ARE LONGER THAN THE LEAD REQUESTED NEED TO BE INCREASED IN RELATION.

PRODUCTION/HOUR:
50.000