TP6/V-PR/1
Cutting bending forming machine for axial components vertical mounting
86.OL01
Machine model TP6/V-PR/1 is designed for cutting, bending and forming taped axial components for vertical mounting. The standard form locks the components into the P. C. Board. Almost all dimensions are adjustable. This model handles components with lead diameters from 0,5 to 0,8 mm.
Special versions can be manufactured to form leads with different dimensions. It is possible to eliminate the preforming and only operate the “V” bend of components.
WARNING: THE MINIMUM LENGTH OF THE LEAD BETWEEN THE BODY AND THE TAPE MUST BE AT LEAST EQUAL TO THE LENGTH OF THE BODY PLUS 15 MM
PRODUCTION/HOUR:
TAPED 7.000
LOOSE 5.000
TAPED 7.000
LOOSE 5.000
850750
DIE ASSEMBLY FOR PITCH 2,54 MM
DIE ASSEMBLY FOR PITCH 2,54 MM
TP6/V-PR/2
Cutting bending forming machine for axial components vertical mounting
86.OL02
Machine model TP6/V-PR/2 is designed for cutting, bending and forming taped axial components for vertical mounting. The standard form locks the components into the P. C. Board. Almost all dimensions are adjustable. This model handles components with lead Ø from 0,5 to 0,8 mm.
Special versions can be manufactured to form leads with different dimensions. It is possible to eliminate the preforming and only operate the “V” bend of components.
WARNING: THE MINIMUM LENGTH OF THE LEAD BETWEEN THE BODY AND THE TAPE MUST BE AT LEAST EQUAL TO THE LENGTH OF THE BODY PLUS 18 MM
PRODUCTION/HOUR:
TAPED 7.000
LOOSE 5.000
TAPED 7.000
LOOSE 5.000
850800
DIE ASSEMBLY FOR PITCH 5,08 MM
DIE ASSEMBLY FOR PITCH 5,08 MM
